Custom Stainless Steel Parts for Stamping & Fabrication
Kailai manufactures custom stainless steel parts through metal stamping and sheet metal fabrication. We process common stainless steel grades including 304, 316 , as well as 304L, 316L and 409L, according to customer drawings, material specifications and production requirements.
Our manufacturing processes are selected according to part geometry, material thickness, tolerances and forming requirements. We support prototypes, short runs and repeat production for custom stainless steel components.
Tearing & Thinning Control
Controlled forming helps reduce cracking and localized thinning during deep drawing.
Surface Scoring Prevention
Tooling conditions and process control help reduce friction-related marks and surface damage.
Springback & Tolerance Control
Tooling and forming conditions are adjusted to maintain dimensional consistency.
Stainless Steel Stamping & Forming Capabilities
Stainless steel requires careful control during forming because of its strength, work hardening and springback characteristics. Kailai selects suitable tooling and processing methods according to the material grade, thickness and part geometry.
Stainless Steel Stamping
Our stainless steel stamping processes are suitable for producing brackets, covers, mounting components and other custom stamped parts with consistent dimensions.
Deep Drawing
Stainless steel can be deep drawn into cups, shells, housings and other three-dimensional components. We control material flow, forming depth and local thinning to reduce the risk of cracking and wrinkling.
Laser Cutting & Bending
For prototypes, low-volume production or parts requiring additional fabrication, laser cutting and bending can be combined with stamping according to the component design.



Stainless Steel Parts Manufacturing Capabilities
| Specification | Capability |
|---|---|
| Stainless Steel Grades | 304, 304L, 316, 316L, 409L |
| Material Thickness | 0.2–8 mm |
| Part Size | 10–1000 mm |
| Tolerance | Up to ±0.05 mm |
| Processes | Stamping, Deep Drawing, Laser Cutting & Bending |
| Tooling | In-house tooling |
| Production | Prototype, Low Volume & Repeat Production |
| Lead Time | Typically 25–35 days |


Stainless Steel Forming Challenges We Control
Tearing & Thinning Control
Stainless steel can experience cracking or localized thinning during deep drawing and forming. We consider material properties, forming depth, tooling and process conditions to help maintain consistent part quality.
Surface Scoring Prevention
Stainless steel surfaces can be affected by friction and tooling contact during forming. Appropriate tooling conditions and process control help reduce surface scoring and maintain the required surface quality.
Springback & Tolerance Control
Springback can affect the final dimensions and angles of stainless steel parts. We account for material properties and forming conditions to maintain dimensional consistency against the approved drawings.
Stainless Steel Grades We Process
Kailai works with commonly specified stainless steel grades for custom stamped and fabricated components.
International Standards
Material grades can be specified according to ASTM, GB, EN, JIS or customer requirements. For projects involving different international standards, we can review the specified grade and material documentation before production.
| Stainless Steel Grade | Typical Characteristics |
|---|---|
| 304 | General corrosion resistance and good formability |
| 304L | Low-carbon version of 304, suitable for applications requiring improved weldability |
| 316 | Enhanced corrosion resistance for demanding environments |
| 316L | Low-carbon version of 316 with good corrosion resistance and weldability |
| 409L | Ferritic stainless steel commonly used for heat and automotive applications |
Stainless Steel Material Thickness
Kailai supports stainless steel stamping and fabrication for material thicknesses from 0.2 mm to 8 mm, depending on the material grade, part geometry and forming requirements.
The appropriate thickness is evaluated together with the part design, required strength, forming depth and dimensional tolerances.
Stainless Steel Surface Finishing & Secondary Operations
After stamping or fabrication, stainless steel parts can receive suitable finishing processes according to the material, application and required surface condition.
Deburring
Removal of sharp edges and burrs generated during stamping, laser cutting and forming to improve part safety and surface quality.
Pickling
Acid pickling can be used to remove surface contaminants and oxidation from stainless steel parts after forming or fabrication.
Passivation
Passivation helps restore and strengthen the protective oxide layer on stainless steel surfaces to support corrosion resistance.
Electropolishing
Electropolishing provides a smoother and cleaner stainless steel surface and can be selected when improved surface finish is required.
Brushing
Brushed finishing creates a consistent directional surface texture and can be selected according to the required appearance and application.


Stainless Steel Parts for Different Industries
Stainless steel is used across industries where corrosion resistance, durability, cleanliness or specific material properties are important.
Automotive
Custom stainless steel components can be used for automotive and exhaust-related applications where heat resistance and corrosion resistance are required.
Machinery
Stainless steel parts are suitable for machinery and equipment components requiring durability and resistance to demanding operating environments.
Medical & Care
Stainless steel is widely used for selected medical and care equipment components where corrosion resistance, cleanliness and material durability are important.
Electronics
Stainless steel can be used for brackets, housings, mounting components and other electronic equipment parts where dimensional stability and corrosion resistance are required.
Stainless Steel Quality Control
Consistent material and dimensional quality are important for stainless steel stamped components.
Kailai verifies material specifications and monitors key dimensions during production. Inspection can include material verification, dimensional checks, surface inspection and final quality control according to project requirements.
Material documentation and traceability can also be provided when required.

Why Choose Kailai for Custom Stainless Steel Parts?
Kailai combines in-house tooling, metal stamping and sheet metal fabrication capabilities to manufacture stainless steel components according to customer drawings and specifications.
We support projects from prototype and low-volume production to repeat orders, with manufacturing processes selected according to material grade, thickness, part geometry and production requirements.
Request a Quote for Custom Stainless Steel Parts
Have a stainless steel part drawing or specification?
Send us your 2D drawing, 3D model, material grade and production requirements. Our team can review the project and recommend a suitable manufacturing approach.